Tel: +86-592-2202090
Fax: +86-592-2202098
Mobile: +86-15859214302
E-mail: sales@xiamenbrumaire.com
MSN: --
|
BGTL-300KW Cummins Generator
infomation: 1. Compliance with all main standard,Such as ISO8528(GB/T2820-97), GB755,BS5514, ISO3046, ISO14001, IEC34-1.
2.Provides a full line of brand new and high quality products. Each and every unit is strictly factory tested before shipment. 3.Quality Warranty is according to our standard conditions: 12 months from BL date or 1,000 running hours, subject to the earlier one. 4.CE marked. |
| Engine General Data | |||||||||
| Manufacture | CCEC CUMMINS | ||||||||
| Model | NTAA855-G7 | ||||||||
| Number of Cylinders | L6 | ||||||||
| Borexstroke | mm | 140x152 | |||||||
| Displacement | L | 14 | |||||||
| Compression ratio | 14.0：1 | ||||||||
| Governor Type | Electrical(cummins PT) | ||||||||
| Steady State Stability at Any Constant Load | % | ±0.25 | |||||||
| Air intake way | Turbo charged& Charge Air Cooling | ||||||||
| Engine Electrical System | |||||||||
| Max. permissible restrictions | Kpa | 10 | |||||||
| Standard exhaust pipe diameter | mm | 127 | |||||||
| Engine Electrical System | |||||||||
| Battery Voltage | 24V | ||||||||
| Charging generator | A | 35 | |||||||
| Starting motor | N.A | ||||||||
| Lubrication system | |||||||||
| Minimum Required Lube System Capacity-Sump plus Filters | L | 37 | |||||||
| Maximum Oil consumption | L/hr | 0.24 | |||||||
| Cooling System | |||||||||
| Water capacity (engine only) | L | 21 | |||||||
| Standard thermostat range | ℃ | 82_93 | |||||||
| Maximum Top Tank Temperature for Standby/Prime Power | ℃ | 104/100 | |||||||
| Cooling fan | Blower type,steel 914mm diamete | ||||||||
| Cooling Fan Loss | KW | 12.3/18.6 | |||||||
| Fan blast volume | m3/s | 12.26/14.3 | |||||||
| Specifications | |||||||||
| Gense Frequence＆Egine Speed | 50Hz 1500 rpm | 60Hz 1800 rpm | |||||||
| Operating model | Prime | Standby | Prime | Standby | |||||
| Gross Engine Power Output | kwm | 343 | 377 | 399 | 436 | ||||
| Fuel Consumption | 100% | l/hr(g/kwh) | 83.8(205.2) | 93.1(207.6) | 98.3(207.0) | 108.8(209.4) | |||
| 75% | l/hr(g/kwh) | 62.9(205.2) | N.A | 74.3(208.1) | N.A | ||||
| 50% | l/hr(g/kwh) | 42.6(208.7) | N.A | 51.8(217.6) | N.A | ||||
| 25% | l/hr(g/kwh) | 23(225.0) | N.A | 28.2(237.1) | N.A | ||||
| 10% | l/hr(g/kwh) | 11(268.1) | N.A | 14.0(292.9) | N.A | ||||
| Piston Speed | m/s | 7.6 | 7.6 | N.A | N.A | ||||
| Engine Water Flow to Egine | l/sec | 5.4 | 5.4 | N.A | N.A | ||||
| intake Air Flow | l/s | 485 | 510 | N.A | N.A | ||||
| Exhause Gas Temperature | ℃ | 485 | 515 | N.A | N.A | ||||
| Exhause Gas Flow | l/s | 1325 | 1420 | N.A | N.A | ||||
| Radiated Heat to Ambient | kw | 46 | 51 | N.A | N.A | ||||
| Heat Rejection to Coolant | kw | 206 | 227 | N.A | N.A | ||||
| Heat Rejection to Exhause | kw | 241 | 265 | N.A | N.A | ||||
| Friction Horsepower | kw | 22 | 22 | N.A | N.A | ||||
| Alternator Data | |||||||||
| Model | BGTL-300-4 | ||||||||
| Output power | kw | 300/350 | |||||||
| Rated power factor | 0.8 | ||||||||
| Frequency | Hz | 50/60 | |||||||
| Maximun overspeed | rpm | 2250 | |||||||
| Insulation class | H | ||||||||
| Class of Temperature Rise | H | ||||||||
| Execution | Brushless | ||||||||
| Sustained short-circuit current | 300%(3IN):10s | ||||||||
| Protection | IP23 | ||||||||
| Votage regulation | ±0.5% | ||||||||
| Total harmonic TGH/THC | ＜2% | ||||||||
| Waveform:NEMA=TIF | ＜50 | ||||||||
| Waveform:I.E.C=THF | ＜2% | ||||||||
| Bearing | single | ||||||||
| Coupling | Direct | ||||||||
