BGTL-360KW Cummins Generator

Engine General Data
Manufacture		CCEC CUMMINS
Model		KTA19G3
Number of Cylinders		L6
Borexstroke	mm	159x159
Displacement	L	18.9
Compression ratio		14.5：1
Governor Type		Electrical(cummins PT)
Steady State Stability at Any Constant Load	%	±0.25
Air intake way		Turbo charged& Charge Air Cooling
Engine Electrical System
Max. permissible restrictions	Kpa	10
Standard exhaust pipe diameter	mm	165
Engine Electrical System
Battery Voltage		24V
Charging generator	A	35
Starting motor		N.A
Lubrication system
Minimum Required Lube System Capacity-Sump plus Filters	L	50
Maximum Oil consumption	L/hr	N.A
Cooling System
Water capacity (engine only)	L	30
Standard thermostat range	℃	82_93
Maximum Top Tank Temperature for Standby/Prime Power	℃	104/100
Cooling fan		Blower type,steel 1067mm diamete
Cooling Fan Loss	KW	9.7/24.93
Fan blast volume	m3/s	17.6/19.8

Specifications
Gense Frequence＆Egine Speed		50Hz 1500 rpm		60Hz 1800 rpm
Operating model		Prime	Standby	Prime	Standby
Gross Engine Power Output	kwm	403	448	463	511
Fuel Consumption	l/hr	97	107	111	122
	l/hr	73	N.A	86	N.A
	l/hr	51	N.A	61	N.A
	l/hr	30	N.A	37	N.A
	l/hr	9	N.A	12	N.A
Piston Speed	m/s	7.9	7.9	9.5	9.5
Engine Water Flow to Egine	l/sec	10.2	10.2	12.4	12.4
intake Air Flow	l/s	486	533	611	647
Exhause Gas Temperature	℃	524	532	471	491
Exhause Gas Flow	l/s	1345	1489	1579	1713
Radiated Heat to Ambient	kw	58	64	67	74
Heat Rejection to Coolant	kw	247	274	283	313
Heat Rejection to Exhause	kw	263	287	302	328
Friction Horsepower	kw	45	45	60	60


Alternator Data
Model		BGTL-360-4
Output power	kw	360/410
Rated power factor		0.8
Frequency	Hz	50/60
Maximun overspeed	rpm	2250
Insulation class		H
Class of Temperature Rise		H
Execution		Brushless
Sustained short-circuit current		300%(3IN):10s
Protection		IP23
Excitation system/AVR Model		SHUNT/R250
Votage regulation		±0.5%
Total harmonic TGH/THC		＜2%
Waveform:NEMA=TIF		＜50
Waveform:I.E.C=THF		＜2%
Bearing		single
Coupling		Direct

【 Go Back 】 | 【 Close this window 】